paul
Full Member
Tall paul
Posts: 124
|
Post by paul on Oct 9, 2011 8:29:22 GMT
Been having clutch trouble in the special took out surflex 5 plate, replaced with green 5 plate........couldnt get that Bxxxxxx set up wasnt working basket/plate combination anyway got 'standard' 4 plate althought green plates, 1.5 steels. 3mm top plate, Also used centre spring Took out for a short run yesterday appears good , bloody stiff on the fingers though, that'll test the cable quality. Paul Happy Days
|
|
|
Post by davet on Nov 13, 2011 17:06:57 GMT
Mysterious fuel leak found at last. After checking carb, tap, tank, tank joints eventually spotted dripping through paint . Found this hairline crack.
|
|
|
Post by dmilk on Jan 20, 2012 19:42:06 GMT
hopefully ready about April...
|
|
|
Post by mojo41 on Mar 25, 2012 13:02:16 GMT
Been messing with my GP gearing lately and with help from Burn its all back in the scooter. Thanks Dave! Gone for a SX200 set up but with a 47 rear sprocket. We'll see what its like but cant be worse than the GP150 box. Couldn't resist the JL when I was at scootopia so got a bit more to do to get it set up again but thats all part of the fun. Couple of other additions include a digital speedo that I'm playing with and an outboard disc, but the hub is still at the powder coaters! Not sure if the picture attachments will work though! Attachments:
|
|
|
Post by mojo41 on Mar 25, 2012 13:06:32 GMT
Here's one of the speedo! Maybe I'll get it working soon. There are so many wires, I'll probably cut a few off! Its gonna have a speedo, tacho, fuel warning light (from the camlam fast flow tap) and high beam if it all goes to plan Attachments:
|
|
|
Post by dmilk on Apr 6, 2012 18:53:30 GMT
|
|
|
Post by davet on Apr 10, 2012 23:31:54 GMT
interesting 3 hours spent at Harrys
|
|
|
Post by davet on May 5, 2012 22:31:39 GMT
|
|
|
Post by davet on Jun 2, 2012 22:58:26 GMT
home made JL3 decoke ,caustic soda rig
|
|
|
Post by davet on Jul 29, 2012 20:32:43 GMT
expander ring broken pushed out ring onto exhaust prot and burred rings and nipped piston. Leaving out expander ring on new piston. Chamfering exhaust port. piston nipped up in 4 places adjacent to stud holes. Bore getting thin. 66.5 bore in 150 barrel !!! last remore me thinks new yam rd350 piston and a hone ready to go back together
|
|